The Racing Magazine in the Islands
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

THE ASYLUM!... Workshops & Tools for DIY MadMen.
Goto page 1, 2, 3, 4, 5, 6, 7  Next
 
Post new topic   Reply to topic    Zorce.com Forum Index -> The Mitsubishi Madmen
View previous topic :: View next topic  

What's your "take" on tuning?
Do you prefer DIY tuning?
100%
 100%  [ 14 ]
Do you prefer to pay a mechanic and avoid the hassle?
0%
 0%  [ 0 ]
Do you prefer just to buy modified wheels with no work.
0%
 0%  [ 0 ]
Total Votes : 14

Author Message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sat Apr 07, 2007 11:03 am    Post subject: THE ASYLUM!... Workshops & Tools for DIY MadMen. Reply with quote

... and now time for something new for Do-It-Yourself Mitsubishi MadMen...

THE ASYLUM!......
Quote:
Here we'll showcase the "Best-of-the-Best" in Ultimate Workshops around
the world... plus Tool & Equipment Reviews... and Miscellaneous Auto Features
for 2nrs and other Do-It-Yourself Mitsubishi MadMen.

Local Mitsubishi MadMen aren't left out either.
Quote:
Here's a place to highlight your personal tools, equipment and workspace.
Remember... It's not about how fancy it is...
it's about how focused you are about what you love to do and where you do it.
You don't need a workshop like the Diamond Motors Dealership.
The BEST work is often carried out in VERY humble conditions...
even on a piece of plywood on the grass in a drive-way.
I worked like that for years, since I was a boy... Rolling Eyes
Thank God things are a little better now... at least at work. Home to follow a.s.a.p.

Basically it's a place to MOTIVATE us when we get tired and fed-up.
It's a place for us to "dream & dribble"... while we get "down & dirty" in the real world.

Hope it helps. Comments and suggestions please MadMen.


Last edited by Sanctifier on Wed Dec 02, 2015 1:50 pm; edited 13 times in total
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sat Apr 07, 2007 12:07 pm    Post subject: Reply with quote

Let's start the ball rolling with the best Garage/DIY Home Workshop I have ever seen...
Aptly named "The Ultimate Garage" this is heaven IMHO.

Quote:
BEFORE... Stage I... 1957-1994.
3-car detached Garage



Quote:
DURING... Stage II... 1994.
20x20' workshop


Toolroom... (Stage II)


Quote:
AFTER... Stage III...2001-2003
Garage Workshop and Dyno Room (left),
Parking Garage for my wife's vehicles (center) and
Detail & Assembly Garage (right).
Total floor area is just under 1300 sq ft.)


Toolroom... (Stage III) After selling all cabinets etc. in Stage II... Shocked


DynaPak 4-wheel dyno... 'Nuff said!

Surrounding Landscaped Garden...Space to chill with your friends

Night time...


It's so good that the builder/owner has started a new business designing and building
similar "high-end" garages for the "Rich & Famous." Cool
Sanctifier wrote:
I can't afford all that but it did motivate me to spruce up my own workshop
... and buy some decent tools for once, too!

Link--> Ultimate Garage

Dribble & Enjoy... I did!... Cool
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Wed Nov 28, 2012 4:56 am; edited 9 times in total
Back to top
View user's profile Send private message
MG Man
Zorce Klingon Warrior


Joined: 19 May 2005
Posts: 2683
Location: usually on the back page

PostPosted: Sat Apr 07, 2007 12:30 pm    Post subject: Reply with quote

Hmm, garage?

The plan for my house is to build with every thing upstairs, indian-style, so we can fit
everything downstairs, which includes Karen's Corolla, my company car, MG, HSR, Locost
and the Mini when I eventually take it fomr my sis

If we do eventually enclose downstairs as apartments, the crs will be relocated to garages
on either side of the house, where they will have to be parked in a line
_________________

I know it's so, for I told me so
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sat Apr 07, 2007 1:07 pm    Post subject: Reply with quote

Whoa!... quick reply MG... Laughing Didn't even have time to finish editing last pix...
Take a look at the yard above... I think I could live there... Laughing

Totally fed-up of working in rubbish, dirt & chaos. Finishing more efficient ToyRoom at work
for Evo suspension & engine upgrade then rwd GSR Restoration (with DIY Body & Paint)
"New" (refurbished) Workbench to do next week. More tools & equipment coming too. Wink
I'll post a couple "befores & afters" soon.

Definately gonna do something decent, more efficient and comfortable at home too.
To avoid mistakes and get new ideas from you guys... I'll post some 3D renderings before
and during construction of the Home Workshop for comments and layout suggestions
...and some pix after construction of Sanctifier's ToyRoom!... Wink
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Thu Apr 12, 2007 2:20 am; edited 1 time in total
Back to top
View user's profile Send private message
MG Man
Zorce Klingon Warrior


Joined: 19 May 2005
Posts: 2683
Location: usually on the back page

PostPosted: Mon Apr 09, 2007 8:50 pm    Post subject: Reply with quote

what about the plans u told Peter about??? I would love to drop the MG and HSR suspensions
and get them blasted and powder coated Very Happy Very Happy Very Happy Very Happy Very Happy Very Happy
_________________

I know it's so, for I told me so
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Tue Apr 10, 2007 6:40 am    Post subject: Reply with quote

Quote:
what about the plans u told Peter about???...

Good progress so far. I towed 4wd GSR yesterday to put back on the road until final upgrade.
ToyRoom #1 and workbench will be finished before the end of next week (I hope.)
More tools being ordered this month.

Researching RUST. No Caustic Dipping facilities in T&T. Alternatives = Media Pressure Blaster
(to be ordered soon) and Recycled Chemical Shower (less likely...expensive chemical.)
Also investigating Electrolytic Rust Removal of the COMPLETE shell. Cheapest & BEST
alternative. Got an AC/DC welding plant I can borrow for a weekend to check initial setup?
Quote:
...I would love to drop the MG and HSR suspensions and get them blasted and powder coated...

Instant Shortcut: You don't have to wait for me to get equipment for you to do it.
AFAIK local facilities are available for Media Blasting and definately for Powder Coating.

I'll use it frequently so I need my own equipment... If yuh want then just do what I did.
Ask around. Most people abandon their electric ovens for new gas ranges.
Just got TWO (more) electric ranges for FREE. I have a very good technician to service it too.
That's your Powder Coating Oven! When I finish Projects, I'll cannibalize all three; build a
bigger 36" x 36" unit (galvanize sheet, MIG welding & powder paint) and get him to transfer
all the electrical bits. There yuh go!... 1/10 the cost of a similar commercial P/Coat Oven. Cool
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Tue Jun 26, 2007 4:18 am; edited 3 times in total
Back to top
View user's profile Send private message
droppa
Looking for the Jedi base


Joined: 08 Apr 2005
Posts: 29
Location: tryin tuh find the catsuit woman.

PostPosted: Thu Apr 12, 2007 8:14 am    Post subject: Reply with quote

waht the f------...

thas some mean arse garage the soldier have there boss....


i need the lotto to get a shop like that......
fuh now ah go jus have to cool it on the ole greasy concrete..... Wink
_________________
on the lookout for old model lancer/galant parts
i may have wat you are lookin for.
Back to top
View user's profile Send private message
MG Man
Zorce Klingon Warrior


Joined: 19 May 2005
Posts: 2683
Location: usually on the back page

PostPosted: Thu Apr 12, 2007 7:16 pm    Post subject: Reply with quote

^^^^dare not underestimate the knowledge of his holiness Thine Sanctrifier Exclamation

Just a note on tools, I bought some nice bits from Sears, including 'wobbly' extensions (set of three, US20.00), magnetic pickup tool (US$2.00), Magnetic Tray with rubber base (US$10.00), flexhead / bent handle 1/4 drive ratchet (US12.00), finger screwdriver (US$2.00) and Stanley ratcheting screwdriver with extra bits (US$10.00)

The wobblies are very cool. U can attach a socket as normal, or snap it part way, and teh socket 'wobbles' on the end, for tight areas where u need some 'play' Very cool Cool

The magnetic tray is very useful when u are removing small screws etc. Just stick the tray anywhere that's metallic, and drip your screws, nuts, bolts etc onto it, and they stick!





Flex / bent ratchet


Finger screwdriver


wobbly, normal position


wobbly position

_________________

I know it's so, for I told me so
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Fri Apr 13, 2007 4:46 am    Post subject: Reply with quote

droppa wrote:
waht the f------...
thas some mean arse garage the soldier have there boss....

Rumour has it that a $20 million US "Garage" is under construction now... Rolling Eyes

BTW nice tools MG.
MG Man wrote:
^^^^dare not underestimate the knowledge of his holiness Thine Sanctifier Exclamation

Take it easy, padna. Ah tired saying that I am no expert. The info is there for anyone to see.

Reading a little more than average doesn't make me a Mitsubishi expert
... or any other kind for that matter.
It just proves beyond the shadow of a doubt... that I can read. Wink Laughing
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Tue Oct 07, 2008 10:31 am; edited 2 times in total
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sun Jun 10, 2007 5:37 pm    Post subject: Reply with quote

Update:
Quote:
Remember I said that my DIY Powder Coating Oven would be 1/10 of OEM cost?
Well try 1/50 of OEM cost instead. I checked for a small Oven.
It's $5,600 - $6,100 US + Shipping + Duty + VAT... Over $42k TT???...
A DIY kit on eBay is $950 US + Shipping + Duty + VAT... Rolling Eyes
Yup! I'll DEFINATELY DIY... For less than $1000 TT too! Thanks for the ovens fellas! Very Happy

Here's a couple pix of my Dad's old workbench, before and after "Resurrection."
.................. ...........................
BEFORE: "Naked" with three doner ovens in the background... AFTER: in its new "clothes"...

BTW MG I landed an unused Pressure Blaster on eBay for less than 1/2 price. Pix soon.
Next up this week---> MIG welder (Sale @ 30% off) + Safety Equipment (eBay.)
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Fri Nov 20, 2015 1:38 pm; edited 6 times in total
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Fri Jun 15, 2007 9:37 am    Post subject: Reply with quote

And if you think the Ultimate Garage (above) was cool...
Check this one out... http://media.drive.com.au/?rid=20783
Right click for "Full screen" Truely one of the best Big Boys' Toy Collections EVER! Cool
_________________
Walk softly... and carry a BIG stick!
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sat Jun 23, 2007 5:16 pm    Post subject: Reply with quote

BTW MG... Sandblaster is here at last, after the usual delays. Very Happy
Assembling on Monday. Next... Electrostatic (Powder Coating) Gun.


Ordering Safety & HVLP Spray Painting equipment on Monday too.
Anyone have blast media for a TEST RUN when it gets here in 2.5 weeks?
Looking for small samples (10-12 lbs ?) of glass beads... aluminium oxide etc.
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Wed Nov 28, 2012 7:01 am; edited 4 times in total
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sat Jun 23, 2007 7:23 pm    Post subject: Reply with quote

Okay... Back to Dreamland for awhile... or is it really?
Ultimate Garage wrote:
For most of us, the limited size of our homes, zoning restrictions, and the cost of equipment
and construction make building a home workshop out of the question.
The Club Garage concept is an excellent opportunity for a group of friends to share in
the investment of creating a workshop/garage for the servicing and storing of their cars
(and motorcycles, boats, etc).


Ultimate Garage wrote:
Take a 5,000 square foot warehouse and 3 close friends (who happen to like BMW's and
Harley's), a serious infusion of capital for remodeling and purchase of equipment, and you've
got a home away from home to indulge your passion for motorsports.
Mitch Herman, president of Motorsport Imports, with the help of two of his closest friends (John
& Kevin), have created their own "ultimate garage", complete with auto and motorcycle lifts,
Lista cabinetry and workbenches, the best tools & service equipment (from Snap-on, Miller,
Kaeser, etc), plus a home theatre with a supporting kitchen to help relax when they're not
turning wrenches.

Link--> MotorSport Playhouse
Sanctifier wrote:
Just keep in mind that SH!T happens...
So draw up an Agreement in advance, with a list of ASSETS & OWNERS...
and how new joint purchases will be divided in case of a "split"... No biggie!

It could be definately possible for the right group... Idea WHY NOT FOR A FEW Mitsubishi MadMen Question
If anyone's interested send me a PM or call 684-4552. Cool
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Mon Dec 22, 2008 8:02 am; edited 1 time in total
Back to top
View user's profile Send private message
Sanctifier
Zorce Moderator


Joined: 07 Apr 2005
Posts: 1794
Location: Good question!

PostPosted: Sat Jul 14, 2007 7:30 am    Post subject: Reply with quote

Attention!... ATTENTION!... ATTENTION!...
Tools & Equipment purchases:
Sanctifier wrote:
Buy all tools & equipment over the internet.
DON'T try to buy new stuff. TOTAL WASTE OF $$$$$.
ALWAYS buy "Surplus" or "Scratch & Dent" stuff when available... best "Bang-for-the-buck."
Item is usually UNUSED and only suffers from minor aesthetic bruises any DIYer can fix.
EXCEPTION: Welders and other tools with electric motors &/or electronic components.
Judge your risk very carefully in such cases. I prefer to buy new or at least UNUSED stuff then.


Savings usually 33-50% OFF of US retail. BTW that is 60-75% CHEAPER than local price.

SOURCES: eBay... or Froogle (Search for "Froogle".)
Then you can search for BIG BUCK top quality tools like Snap On at bargain basement prices.

Tip: Join a local express courier company... Skybox, eCouriers (mine) etc.
Many suppliers don't ship to P.O. Boxes or to overseas customers. Ship to courier's US address.
BTW use PayPal or a Wire Transfer via your Bank for payments. Safer that way! Wink

e.g I want a drill-press. 16.5" woodworking models spin too fast to drill steel properly.
Local metalworking models usually cost $'000s TT MORE than woodworking models.
I'm GREEDY! Laughing ... I wanted a 20" model... so add about $200 US to US retail.
... and I want Variable Speed feature too. (No belt changes required to change speed.)
... so add ANOTHER $1,000 US to the bill, just for that feature!... Shocked
New brand-name "VS" drill-press costs $2,000-4,500 US... x 9 approx. for $TT. Shocked
e.g. JET 20" VS metalworking drill-press = $41,860 TT retail, VAT included... Rolling Eyes

Long story, short. Yesterday, I bought an UNUSED 20" VS, metalworking drill-press...
............ Turn Pro:
.........
......... US retail = $2,000... "Scratch & Dent" price = $500 US
Should arrive in three weeks. It took nearly three months searching eBay & Froogle
but it was damn well worth it IMHO! Wink This "Surplus sales" SH!T works! Exclamation
_________________
Walk softly... and carry a BIG stick!


Last edited by Sanctifier on Thu Nov 19, 2015 11:01 am; edited 23 times in total
Back to top
View user's profile Send private message
Princess-Kaveshla
Zorce Jedi Photo Master


Joined: 06 Apr 2005
Posts: 1190
Location: Daytona Beach, FL

PostPosted: Sat Jul 14, 2007 8:18 am    Post subject: Reply with quote

What! That was ah deal!
_________________
Mowgli : "Use the Zorce Princess Kaveshla!"...
Prayer works. Just do it.
Back to top
View user's profile Send private message Yahoo Messenger MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    Zorce.com Forum Index -> The Mitsubishi Madmen All times are GMT - 5 Hours
Goto page 1, 2, 3, 4, 5, 6, 7  Next
Page 1 of 7

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group